Click on the tips for more explanations
(note: for the moment, resources links in the tips are still in french)
The maximum temperature (100°C) does not seem to significantly impact the computer's processor performance.
Use common sense.
UserDiag tests the components by generating a certain load, but maybe your daily usage does not heat up as much.
Also check the temperatures during normal use (in your favorite game/software, for example).
If everything seems fine, there may not be a problem.
For comparison, this processor in other "long" diagnostics reaches 89°C on average.
However, if you think the temperature is too high and it shouldn't heat up that much, here are some tips:
- Depending on the overheating, simply opening the computer case may be enough.
- Otherwise, first check that the processor's cooling system (heatsink or AIO/water cooling) is working.
If everything seems correct visually but the problem persists, check that the cooling system is properly attached.
- To check the attachment, turn off your computer and open the case.
Remove the processor's cooling system, checking that it was properly attached.
Also check that the thermal paste was spread over the entire surface of the processor.
Reattach the cooling system by applying a pea-sized amount of thermal paste on the processor, then secure it properly.
Run a new diagnostic to see if the problem is resolved.
If the problem persists and you are unsure:
- Recheck that the cooling system is properly attached and in contact with the processor.
- In the case of an AIO/water cooling, check that it is not defective by touching the tubes, if one is hot and the other cold, for example.
- Depending on the choice of processor, it is possible that the current cooling is not sufficient depending on the usage.
- If you have doubts, do not hesitate to ask for help from a competent person.
To enable the RAM's XMP profile (also called DOCP or EXPO), please follow this tutorial.
Note: If you cannot find the option in the BIOS and your PC is an OEM brand (HP Omen, Dell, Lenovo, etc.), it is possible that the option is not available.
Diagnostic type >Long
Diagnostic count >3
App version >App versionVersion of the application used during the diagnostic25.1.1
Performed >10d (2025-01-10)
Diagnostic duration >17min 59s
Diagnostics history on this PC Copy the report link
Share the report via QR code
Go to the motherboard website
Manufacturer >MSI
Model >PRO B660-A DDR4 (MS-7D59)
VRM temperatures min/max >VRM temperatures min/maxThe VRMs (Voltage Regulator Modules) are the power stages located on the motherboard near the processor.
High temperatures can be a sign of:
- insufficient VRM cooling
- processor too demanding for this motherboard
- aggressive overclocking
Note:
Few motherboards have this sensor.39°C / 59°C
.jpg)
Vendor >American Megatrends Inc.
Version >VersionThe BIOS version and date help identify the currently installed BIOS version on the machine.
Notes:
- Sometimes, the retrieved BIOS version may slightly differ from the one displayed on the manufacturer's website.
Example: With an MSI BIOS, the retrieved version might be '2.B0' while on the website, the version is listed as '7D22v2B'.
- The retrieved BIOS date may also slightly differ by a few days/months from the one displayed on the manufacturer's website.
Example: With an MSI BIOS, the retrieved date is 26/01/2024, while on the website, the date is 07/01/2023.
Here, the date on the website corresponds to the upload date, while the retrieved date is the BIOS creation date.1.91 (2022-10-17)
Boot mode >Boot modeBoot mode of the computer:
- Legacy (old mode)
- UEFI (recent mode)UEFI
TPM >TPMThe TPM is a component (physical module on the motherboard or emulated by the processor) that allows secure storage of information.
Specifically, it can store encryption keys, certificates, biometric data, etc.
For example, it is used to encrypt storage with BitLocker or unlock the computer with Windows Hello.
Some anti-cheat software for video games can also use it to confirm the integrity of the game and the system.Active
Secure Boot >Secure BootThis is a security option available in the BIOS.
Secure Boot ensures that the computer boots only with a verified operating system.
This setting may be required by some game anti-cheats (Valorant, FIFA).Active
Boot duration >Boot durationBoot duration is the time elapsed between pressing the power button and the motherboard returning POST OK (successful hardware check).
This can be useful for identifying a slow boot issue.
(long memory training in DDR5, for example).
A boot duration of around ten seconds is normal.
Note that this period occurs before Windows starts.
Applications that launch at Windows startup do not affect this duration.11s
Edition >Windows 11 Professionnel
Version >24H2 (26100.2605)
Installed on >2023-02-08 20:45:30
Fast startup >Fast startupWindows Fast startup allows older computers to boot faster.
Sometimes this mode (enabled by default) can be the source of issues such as LEDs staying on, or crashes at startup with incompatible drivers.Active
Uptime >UptimeUptime is the time elapsed since the last Windows startup.
This information can be useful to determine how long it has been since Windows was last restarted.
Note that if Fast Startup is enabled in Windows settings, shutting down the computer will actually put it into a hibernation state.
Therefore, Windows only fully shuts down during a restart.
(by clicking on restart and not on shutdown)
As a result, you may sometimes observe high uptimes of several days, even if the computer is regularly shut down and turned on.
However, if Fast Startup is disabled, the computer will fully shut down during shutdown, and the uptime will be reset with each startup.4d 10h
VBS >VBSVirtualization-Based Security (VBS) is a security feature in Windows.
Its purpose is to protect certain parts of Windows by isolating them from the rest. It may be enabled by default on compatible Windows 11 installations.
It can also be activated if core integrity in Windows Defender is enabled, when using WSL2, or other virtual machine-related features.
However, this feature may slightly reduce performance when enabled.
This option only protects against certain complex vulnerabilities. It will not protect you from a cryptocurrency miner or password theft, etc.
Microsoft advises gamers, if they wish, to disable this option. (More information)Active
Antivirus >AntivirusCurrently active antivirus on your computer.
Ideally, it is better to use something like Windows Defender, which is relatively effective and already integrated by default in Windows, or use a third-party antivirus of your choice.
However, it is advisable to avoid less recommended antiviruses like Avast, Norton, McAfee, Iobit, etc., which are known for collecting your personal data rather than protecting you.Windows Defender
Name >Intel Core i5-13600KF
Number of cores/threads >14 / 20
Background usage >3%
Power plan >Performances élevées
Base frequency >3.50 GHz
Frequencies min/max >0.07 GHz / 5.09 GHz
PL2 / PL1 >PL2 / PL1Power Limits allow limiting the processor's power consumption to reduce the generated heat.
Example image (anandtech.com)
When these limits are reached, the processor will reduce its frequency to stay within the limit.
The purpose is to allow the processor to operate at a certain power level for a short period, then limit it a few seconds later.
Power Limit 2 (PL2) is the maximum power the processor can consume for a short period (a few tens of seconds).
Power Limit 1 (PL1) is the same but kicks in once the PL2 duration has elapsed.
By default, these are values recommended by the processor manufacturer and chosen by the motherboard manufacturer.
A value above 4000 W is not a bug, it means the power limit is disabled.
(Value too high to be reached, so it never applies)255 W / 255 W
Voltages min/max >0.95 V / 1.33 V
Consumptions min/max >15 W / 129 W
Temperatures min/max >Temperatures min/maxOn average during the long diag of UserDiag, this processor reaches 37°C min and 89°C max.
Average based on a sample of recent diags.50°C / 100°C
Performance level >Performance levelPerformance level determined using data from 880 other diagnostics containing this CPU model.
As this feature is in the testing phase (beta), there are currently no recommendations provided by UserDiag based on the measured performance level.Low (69%)
GPU 1
Model >NVIDIA GeForce RTX 3070
Manufacturer >ZOTAC International Ltd.
VRAM >8 GB (GDDR6 (Samsung))
Driver version >566.36
Driver date >03/12/2024
Consommations min/max >15 W / 220 W
Temperatures min/max >Temperatures min/maxOn average during the Long diag of UserDiag, this graphics card reaches 42°C min and 82°C max.
Average based on a sample of recent diags.36°C / 75°C
Performance level >Performance levelPerformance level determined using data from 428 other diagnostics containing this GPU model.Very good (100%)
Total size >32 GB
Memory type >DDR4
Current frequency >Current frequencyCurrent frequency of the RAM sticks.2128 MT/s
DRAM voltage >DRAM voltageThe DRAM voltage is the voltage applied to the RAM sticks.
Note that this metric is not always accessible depending on the motherboard.1.2 V
Channel >2 x 64-bit
Timings >TimingsCAS15tRCD15tRP15tRAS36tRFC374CR215-15-15-36 (tRFC:374/CR:2)
Usage >7.6/31.9 GB (24%)
Pagefile >PagefileThe pagefile allows the system and software to store data on storage instead of RAM when needed.
Modifying or disabling the pagefile can lead to system stability issues (blue screens, software/game crashes, "out of memory" messages, etc.).
It is strongly advised not to modify or disable the pagefile unless you are sure of what you are doing.Enabled (default)
Comment >CommentHere are the available profiles for your RAM sticks.
The highlighted profiles correspond to the current timings.
However, the frequency may differ.
Note that if different RAM kits are mixed or depending on the processor, not all these profiles may be usable or stable.
XMP 1 | 7-9-9-17 | 1400 MT/s
XMP 2 | 8-10-10-19 | 1600 MT/s
XMP 3 | 9-12-12-21 | 1800 MT/s
XMP 4 | 10-13-13-24 | 2000 MT/s
XMP 5 | 11-14-14-26 | 2200 MT/s
XMP 6 | 12-15-15-28 | 2400 MT/s
XMP 7 | 13-16-16-31 | 2600 MT/s
XMP 8 | 14-18-18-33 | 2800 MT/s
XMP 9 | 15-19-19-35 | 3000 MT/s
XMP 10 | 16-20-20-38 | 3200 MT/s
XMP 11 | 17-21-21-40 | 3400 MT/s
XMP 12 | 18-22-22-42 | 3596 MT/s
XMP 13 | 19-22-22-42 | 3596 MT/s
XMP 14 | 20-22-22-42 | 3596 MT/s
XMP 15 | 21-22-22-42 | 3596 MT/s
XMP 16 | 22-22-22-42 | 3596 MT/s
XMP 17 | 23-22-22-42 | 3596 MT/s
XMP 18 | 24-22-22-42 | 3596 MT/s
No XMP profile enabled
SLOT 1 (Controller0-DIMMA1)
Format >Unknown (empty slot)
SLOT 2 (Controller0-DIMMA2)
Manufacturer >Corsair (Nanya Technology)
Reference >CMH32GX4M2D3600C18
Size / frequency >Size / frequencyThis frequency is the one reported by the RAM stick. It does not always represent the current frequency of your computer, which can be higher or lower.16 GB - 3596 MT/s
SLOT 3 (Controller1-DIMMB1)
Format >Unknown (empty slot)
SLOT 4 (Controller1-DIMMB2)
Manufacturer >Corsair (Nanya Technology)
Reference >CMH32GX4M2D3600C18
Size / frequency >Size / frequencyThis frequency is the one reported by the RAM stick. It does not always represent the current frequency of your computer, which can be higher or lower.16 GB - 3596 MT/s
STORAGE 1
Model >MPCSATASSD 1TB
Type >SSD - SATA
Capacity >1.02 TB
Mode current/max >SATA/600 - SATA/600
Speed current/max >533 - 473 MB/s
Usage read/write >8 TB - 3.59 TB
Power on count >409 times
Power on time >734 hours
Temperature >26°C
Current state (health) >Current state (health)The current state of the storage is an estimate based on SMART metrics.
This estimate may vary depending on the manufacturers and storage models.
The "health" percentage indicates the estimated wear of the flash cells in an SSD.
When new, it is 100%. With use, this percentage decreases.
This estimate is provided by the SSD manufacturer.
IDNameCurrentWorstThresh.Raw01Read Error Rate10010050005Reallocated Sectors Count10010050009Power-On Hours100100507340CPower Cycle Count10010050409A0Uncorrectable sectors count when read/write100100500A1Number of Valid Spare Blocks10010050100A3Number of Initial Invalid Blocks100100504A4Total Erase Count100100508830A5Maximum Erase Count1001005019A6Minimum Erase Count100100502A7Average Erase Count1001005013A8Max Erase Count of Spec100100505050A9Remain Life10010050100AFProgram fail count in worst die100100500B0Erase fail count in worst die100100500B1Total Wear Level Count100100500B2Runtime Invalid Block Count100100500B5Total Program Fail Count100100500B6Total Erase Fail Count100100500C0Power-Off Retract Count100100506C2Temperature1001005026C3Hardware ECC Recovered100100500C4Reallocation Event Count100100500C5Current Pending Sector Count100100500C6Uncorrectable Error Count Off-line100100500C7Ultra DMA CRC Error Count100100500E8Available Reserved Space10010050100F1Total LBA Written10010050114789F2Total LBA Read10010050256037F5Flash Write Sector Count1001005066924Very good (100 %)
STORAGE 2
Model >WD Blue SN570 500GB
Type >SSD - NVMe
Capacity >500 GB
Mode current/max >PCIe 3.0 x4 - PCIe 3.0 x4
Speed current/max >3 344 - 1 988 MB/s
Usage read/write >12.30 TB - 6.79 TB
Power on count >410 times
Power on time >953 hours
Temperature >49°C
Current state (health) >Current state (health)The current state of the storage is an estimate based on SMART metrics.
This estimate may vary depending on the manufacturers and storage models.
The "health" percentage indicates the estimated wear of the flash cells in an SSD.
When new, it is 100%. With use, this percentage decreases.
This estimate is provided by the SSD manufacturer.
IDNameRaw01Critical Warning002Composite Temperature32203Available Spare10004Available Spare Threshold1005Percentage Used006Data Units Read2578994507Data Units Written1423047308Host Read Commands21673090309Host Write Commands1649376400AController Busy Time11910BPower Cycles4100CPower On Hours9530DUnsafe Shutdowns10EMedia and Data Integrity Errors00FNumber of Error Information Log Entries1Very good (100 %)
STORAGE 3
Model >KINGSTON SNV3S2000G
Type >SSD - NVMe
Capacity >2 TB
Mode current/max >PCIe 4.0 x4 - PCIe 4.0 x4
Speed current/max >6 779 - 5 368 MB/s
Usage read/write >6.93 TB - 2.51 TB
Power on count >87 times
Power on time >246 hours
Temperature >38°C
Current state (health) >Current state (health)The current state of the storage is an estimate based on SMART metrics.
This estimate may vary depending on the manufacturers and storage models.
The "health" percentage indicates the estimated wear of the flash cells in an SSD.
When new, it is 100%. With use, this percentage decreases.
This estimate is provided by the SSD manufacturer.
IDNameRaw01Critical Warning002Composite Temperature31103Available Spare10004Available Spare Threshold1005Percentage Used006Data Units Read1453945107Data Units Written527417908Host Read Commands5464708709Host Write Commands156757810AController Busy Time9000BPower Cycles870CPower On Hours2460DUnsafe Shutdowns00EMedia and Data Integrity Errors00FNumber of Error Information Log Entries0Very good (100 %)
SCREEN 1
Model >VG32AQA1A
Max resolution >2560 x 1440
Current frequency >165Hz
Connected via >DisplayPort
Connected to >NVIDIA GeForce RTX 3070
Manufacture date >2022
Size >32"
This active test performs a task that only stresses a single core of the processor.
The graphics card is not stressed during this test.
We observe temperatures, consumption, frequencies, and voltages.
Ideally, we want to see a relatively stable CPU frequency that is not affected by high temperatures, for example.
This active test performs a task that stresses all the cores of the processor.
The graphics card is not stressed during this test.
We observe temperatures, consumption, frequencies, and voltages.
Ideally, we want to see a relatively stable CPU frequency that is not affected by high temperatures, for example.
This active test performs a task that only stresses the graphics card.
The processor is not stressed during this test.
We observe temperatures, consumption, frequencies, and voltages.
Ideally, we want to see a relatively stable GPU frequency that is not affected by high temperatures, for example.
➡️ Note: It is normal to observe potential variations in the processor's frequency or voltage, which is not stressed during this test.
This active test performs a task that stresses all the cores of the processor and the graphics card simultaneously.
We observe temperatures, consumption, frequencies, and voltages.
Ideally, we want to see relatively stable CPU and GPU frequencies that are not affected by high temperatures, for example.
